QSA Engineer
Nakilat
- Qatar
- Permanent
- Full-time
Also, responsible for executing the QC & QA section strategy in close co-0ridonation with Operations, within Marine Business (or Offshore as an when required)AccountabilitiesKey Accountabilities:
1. Establishes and Review of Nondestructive Testing (NDT) procedures Periodically.
2. Prepare Nondestructive Testing (NDT) plan as per the project requirements and the class requirements.
3. Review the Nondestructive Testing (NDT) reports prepared by the Nondestructive Testing (NDT) technicians.
4. Prepare the repair rate report and forwards to the QSA Manager.
5. Assign Nondestructive Testing (NDT) technicians to perform Nondestructive Testing (NDT) work as per the plan.
6. Responsible to effectively communicate the Nondestructive Testing (NDT) status, general welding performance and the Nondestructive Testing (NDT) Technician's performance.
7. Monitor the progress of Nondestructive Testing (NDT), repair activities, etc.
8. Review of project specifications and qualifications of Nondestructive Testing (NDT) technicians according to requirements.
9. Review technical specifications, and standards required in the project and preparation of Nondestructive Testing (NDT) Procedures as required by the project specification for the bidding and for the projects.
10. Co-ordinate with appointed Nondestructive Testing (NDT) level III at all levels for guidance and enhance Nondestructive Testing (NDT) training programs.
11. Coordinating and ensuring all NDT and final inspection are carried out as per approved ITP / Nondestructive Evaluation (NDE) plan or other documents required by the project.
12. Liaises with section/&Project engineers to coordinate inspection & testing activities.
13. Schedules Nondestructive Testing (NDT) inspection and test daily coordinating "hold point" witnessing by Client and Surveyor.
14. Monitor overall qualification status of Nondestructive Testing (NDT) personnel required as per company's written practice
15. Ensure parts and material are inspected and measured without damaging & provide a balance between quality control and cost effectiveness.Accountabilities - 216. Ensure effective and optimal use of both NDT technologies and the most basic NDT method of visual examination. From simply looking at a part to see if surface imperfections are visible, to using computer-controlled camera systems to automatically recognize and measure features of a component.
17. Radiography (RT) - uses penetrating gamma or X-radiation on materials and products to look for defects or examine internal or hidden features
18. Magnetic Particle Testing (MT)- uses technology induce a magnetic field in a ferromagnetic material and then dusts the surface with iron particles (either dry or suspended in liquid) to disrupt the flow of the magnetic field within the part and force some of the field to leak out at the surface and reveal faults.
19. Ultrasonic Testing (UT) - uses technology to emit high frequency sound waves transmissions into a material to detect imperfections or to locate changes in material properties
20. Penetrant Testing (PT)- coats objects with a solution that contains a visible or fluorescent dye, where excess solution is then removed from the surface of the object but is left in surface breaking defects.
21. Leak Testing (LT) - Leaks are detected by using electronic listening devices, pressure gauge measurements, liquid and gas penetrant techniques, or simple soap bubble tests.
22. Review the material certificates certified by authorities to ensure that the supplied good or service meets the required specifications i.e. material's chemical & physical properties (steel, aluminum, brass or other alloys) is compliant with an international standards organization specific standard such as American Society for Mechanical Engineers (ASME) etc.
23. Inspect incoming material integrity and evaluate the effectiveness vendor based on the material delivered. Ensure that any required corrective action is taken to enable business continuity through supply chain delivery.
24. Review sub-contractor welder certificates that are provided by the Contracting Dept. to ensure they meet the applicable code and specification.
25. Liaise with project managers to review the new requirements in the project and to prepare the procedure, Inspection and Test Plan (ITP), Nondestructive Testing (NDT) Plan, Procedure Qualification Record (PQR) & Welding Procedure Specification (WPS) requirements.
26. Assigned in projects to monitor and maintain the work quality standards, and to help ensure that the successful coordination and satisfaction of client inspections.
27. Participate for preparation and dissemination of project lesson learn.
28. Co-ordinate quality stand downs for project activities as planned and required.
29. Coordinate and organize the external and internal project audits.
30. Coordinate with client representative for carrying out the stage wise inspection as per the “Inspection and Test Plan” (ITP)
31. Participate in & lead section initiatives such as Quality Alerts, walkthrough, technical education etc.
32. Complete other responsibilities & duties as assigned.Accountabilities - 3Accountabilities - 4CompetenciesAchievement OrientedCollaboration & TeamworkCustomer CentricityDrive VisionEmpower & Nurture TalentInteractive CommunicationSolution OrientedKey Result Areas
- To ensure target production throughput rate or objectives are safely executed by team in line with Section Plan, KPI's, N-KOM Values and IMS system, through implementing Quality Control (QC) & NDT measures.
- Adhere to health, safety, security and environmental policies, procedures, instructions and controls for the safety of self and others.
Purpose: For coordinating the NDT inspections and issues inline to that.External: Clients & Class Surveyor/ Third Party Inspection (TPI)
Purpose: To propose and to get clarification regarding the NDT operationsFinancial AuthoritiesAs per TOFAQualifications, Experience and Job SkillsQualifications:
- Minimum Diploma in Naval Architecture, Marine Engineering, Mechanical Engineering, Electrical Engineering, Bachelor/Master of Science or its equivalent 2 years of experience in similar fields.
- Minimum American Society for Nondestructive Testing, Nondestructive Testing (ASNT)/ Personnel Certification in Non-Destructive Testing (PCN) Level II
- At least 2 years' experience in relevant position and field.
Generic
1. NKOM-Core Values
2. Commitment to Quality, Health, Safety and Environment
3. Verbal and Written Communication Skills
4. Computer Literacy (Microsoft Office/Excel/ Power point)
5. Knowledge of shipyard operations
6. Customer Focus
7. Global Mindset
8. Supervisory Skills
9. Presentation Skills
10. Problem Solving Skills
11. Creativity and innovative SkillFunctional
1. Qualified NDT interpreter for ultrasonic testing (UT) & penetrating radiation (RT), liquid penetrant testing (PT), Magnetic Particle Testing (MT) & Magnetic Particle Testing (MT),
2. Material Certification Review
3. Welding Inspection - Certification Scheme for Welding Inspection (CSWIP) or equivalent
4. Personnel Certification in Non-Destructive Testing 3.1 / 3.2 / 3.8 / 3.9 ultrasonic testing Level II
5. Knowledge of new construction and repair of marine and offshore
6. Knowledge of welding technology
7. Prepare the Inspection Plan
8. American Petroleum Institute (API) Q1 awareness
9. Integrated Management System (IMS) awareness
10. Knowledge on Offshore Structure (Topsides, Jackets etc.) inspections and requirements of applicable code/standards.
11. Able to understand the client/class requirements & refer the necessary rules & standards for inspection.
12. Able to conduct the quality talk and training.
13. Able to review the Welding Procedure Specification (WPS), Procedure Qualification Record (PQR) & Welding Procedure Qualification Test (WPQT) and prepare the reports.
14. Knowledge on non-destructive and destructive testing.
15. Able to handle client complains and non-conformances.